About PricingKernel

PricingKernel · 08-24-2012

I need top open ports 80, 443 and 1882 to a specific external client (IP address). Can someone help me with the commands for that please?

PricingKernel · 08-16-2012

Hi,I'm trying to forward ports for SQL and VNC using these commands in the CLI:ip nat inside source static tcp 192.168.1.150 5900 interface GigabitEthernet0 5900ip nat inside source static tcp 192.168.1.150 5800 interface GigabitEthernet0 5800ip nat ...

PricingKernel · 08-13-2012

I set up a basic Linksys E2500 with the following information and connected to the internet straight away without a problem:I have spent several hours simply trying to get this basic information into the Cisco 819 using CP Express without success, i....

PricingKernel · 08-28-2012

hi,I tried entering the script suggested by Samuel. Unfortunately the command "nat" after object network SERVER-OBJ is not recognised by my CLI. These are the only supported commands:Network object group configuration commands: A.B.C.D Netw...

PricingKernel · 08-25-2012

OK, I think the first suggestion may have been almost correct then, thanks. But if I wanted to add more than one internal host (in fact all in the range 192.168.1.100 to 149) is there a way to do that or will I have to create 50 object network SERVE...

PricingKernel · 08-24-2012

Sorry about that. So is it possible to open those ports up to the whole range of DHCP assigned IPs as I described?

PricingKernel · 08-24-2012

Thanks. Is the host IP my external IP or the internal IP of a particular client? I need to do this to permit VoIP traffic to some tablets that are connected wirelessly to the internal network and have IPs dynamically assigned by DHCP.

PricingKernel · 08-16-2012

Excellent. Thanks. Connected externally on my iPhone.

Member Since	‎08-13-2012 12:54 AM
Date Last Visited	‎10-09-2017 02:17 PM
Posts	22

User Statistics

User Activity

CLI command to open ports 80, 443 and 1882

Configure 819 to forward ports for SQL and VNC

Help with basic config of 819 using CP Express please

Re: CLI command to open ports 80, 443 and 1882

Re: CLI command to open ports 80, 443 and 1882

Re: CLI command to open ports 80, 443 and 1882

Re: CLI command to open ports 80, 443 and 1882

Re: Configure 819 to forward ports for SQL and VNC