About danparsons

danparsons · 03-27-2014

Hello, I was hoping somebody could help me with the problem i have with creating a site to site tunnel. The site i am working on has a ASA 5505+ which VPN works but another site (which i do not have access to) wants L2L configuring but they only use ...

danparsons · 12-10-2012

I have LAN connectivity issues after replacing a PIX506 with an ASA 5505 8.4(3)OK some background:"Current Network diagram"Netgear Router >>>> Cisco 506E >>>> HP procurve switch >>>>> 4 servers and 30 odd devices.Status:All devices and servers can pi...

danparsons · 05-19-2010

Hi guys,I have looked over my config and gone through several cisco helpsheets, I still cannot access the outside from "inside" the dmz. Here is an overview of what I can and cannot do.OUTSIDE >>> DMZ = OKINSIDE >>>>> DMZ = OKDMZ >>>>>>> INSIDE = OKD...

danparsons · 02-11-2009

Hi,I am looking at the logs in the ADSM and I get the following set of lines (at the bottom). What is supposed to be happening is that software on VISTA_CCTV on the inside is to talk to an internal address at 88.88.88.88. VISTA_CCTV -- [ASA] >>>INTER...

danparsons · 11-24-2008

I have had the following problem before but I cant remember what I did. Could anyone help.My vlan1 inside interface is set to administratively down. and when I ping its says inside interface is shutdown.I have tried issueing the no shutdown command b...

danparsons · 03-27-2014

Thank you for the reply. I am waiting for confirmation from the fortigate site regarding the pre shared key.As for the nonat and ACL, i thought all i needed to do was the them coming in and they do the reverse at there end?DH on phase 2, i created po...

danparsons · 03-27-2014

I've edited crypto map BBLMAP 10 set security-association lifetime seconds 3600 to crypto map BBLMAP 1 set security-association lifetime seconds 3600

danparsons · 12-11-2012

Thanks to you both!It makes more sense after your explanations.I have found the line is in place on the Pix506, however, as I wrote the ASA config from scratch I did not include the line.It appears as you say that it is enabled by default on PIX and ...

danparsons · 12-11-2012

Hi Jennifer,Thanks for your prompt reply!sysopt noproxyarp inside Why is this needed in my case? I have put it in and it has made a difference on my testbed, I can ping devices that I could not before. I will be putting it back into production to te...

danparsons · 05-19-2010

You are awesome,Thanks very much, works great. Think I need to brush up on DMZ setups.

Member Since	‎01-05-2007 03:56 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	25

User Statistics

User Activity

Crypto L2L problem

ASA 5505 8.4(3) inter LAN connectivity issues

Cannot access outside from dmz, ASA 5505.

ADSM deny message help?

ASA no shutdown problem

Thank you for the reply. I am

I've edited crypto map BBLMAP

Re: ASA 5505 8.4(3) inter LAN connectivity issues

ASA 5505 8.4(3) inter LAN connectivity issues

Re: Cannot access outside from dmz, ASA 5505.