Hi deyster94, I have internet connectivity, tested. Please exam the following, when I apply the following NAT rules: object network server1_smtp host 192.168.1.10 ! ! object network server1_pop3 host 192.168.1.10 ! object service tcp_smtp service tcp destination eq 25 object service tcp_pop3 service tcp destination eq 110 nat (outside,inside) source static any any destination static interface server1_smtp service tcp_smtp tcp_smtp nat (outside,inside) source static any any destination static interface server1_pop3 service tcp_pop3 tcp_pop3 access-list outside_access_in extended permit tcp any host 192.168.1.10 eq 25 access-list outside_access_in extended permit tcp any host 192.168.1.10 eq 110 ! access-group outside_access_in in interface outside This results in the following packet trace: *.*.*.69 is the WAN IP from where I try to connect to the firewall over port 110 (telnet *.*.*.69 110). 95.*.*.218 is the WAN IP of the firewall. A said, I have internet connection from the inside network. I can ping 192.168.1.10. From within the Inside network telnet 192.168.1.10 110 works! This looks like port 110 goes trough the firewall, but I can't still not connect from an external site to the internal server. Any suggestions?
... View more
Pff, still no go...I can't understand why... Maybe a packet trace is usefull? First picture is from my message : Jul 17, 2012 10:20 AM Second Picture after the change made on: Jul 17, 2012 2:08 PM Maybe that can help?
... View more