valides007

Here is the scenario per the attached digram:1) VPN client connects to the VPN server on 10.1.70.0 n...

Hi,I created a VPN connection through my ASA5505. The idea is to have some remote clients connected ...

We have a CME with no voicemail feature on it.What hardware do we need to add to the cisco router 28...

I have been using either VG224 or ATA 186 as VoiP gatewas for my analog phones with Call Manager Exp...

I'm not judging you. Probably you have been very helpfull with your free and continued advice. This ...

I'm not judging you. Probably you have been very helpfull with your free and continued advice. This ...

You did help a lot when you offered your reasonable fee. If i need to pay for help smartnet would be...

Tx... have it done, don't need your reasonable fee

Here is my dial-peer and one of the ephone-dn, could you please post an example to show me how to bl...

Rob,Here is my issue:CME 1 <--> CME 2 <--> T1 LineThe extensions i mentioned earlier are sitting in ...

I have a call manager express with 44 extensions. Half of them have extensions that start with 66XX ...

Well i've used VG224 before and here is why i'm trying not use it here:Physically we have 1 to 2 ana...

I've used previously ATA 186 units with call manager express and they worked fine for telephone purp...

i made sure all the ports are configured with idle-voltage high. I also didd shut/no shut on every p...

The line voltage for all VG224 ports is low (10-11V).I have change the idle-voltage to high and the ...