Hi Team,
My customer is having 7600-ES+20G3CXL and 7600-ES20-GE3CX modules on their 7600 routers with RSP720. Please share your experience or views on to create the port channel between these dis-similar modules.
Regards,
C Bhargav
Hi Experts,My customer wants to implement MPLS TE auto tunnel (Primary & backup) for one-hop tunnel and also wants to create mesh tunnel in between PE routers. Is it a valid scenario, if not please explain.
Sample output is as follows
mpls traffic-en...
If I don't change any port-channel load-balancing mechanisms in N7k and N5k (Assuming sid/did/oxid is default in N7k and sid/did is default in N5k), what storage traffic follows in both directions
I am trying to implement both nv satellite and nv edge on two ASR 9006 devices (running 4.2.3). nv edge is working fine and but satellite is not coming up.
Output is
RP/1/RSP0/CPU0:ios#sh nv satellite status Thu Dec 10 14:15:02.059 UTCSatellite 100--...
Hi Experts,I found the below situtation while testing but couldn't troubleshoot. Please let me know where can be the issue
UCS B-blade server chassis is connected to JBOD via FI (end host mode) and MDS switch. Created appropriate Service profile and...
As far as I know both N7k and N5k Fcoe load balancing mechanism depends on underlying ethernet port-channel load balancing mechanism. Can you please provide the reference for your statement.
Yes that's correct. I have mentioned the same in my question.
sid/did/oxid is default in N7k and sid/did is default in N5kBut my question is what could be the impact if we have connected N7k and N5k through FCoE (without changing any load-balancing m...
