We have two 6500s. One is running in power redundant mode and the other is running in combined mode.We need to change the one running in combined mode to redundant mode to ensure it can run ok on one supply if needed but I have a couple of questions....

Does anyone know of any bugs in 6500 Sup720 code 12.2(33)SXH7 for stuck VTY sessions?  We ended up having to reboot a dual supervisor Sup720 as we had a stuck VTY session.A telnet session didn't disconnect cleanly and I couldn't clear it either with ...

I'm trying to upgrade a 3750 stack of 5 switches from 12.1(19)EA1c to 12.2(46)SE and have been using this guide:http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00804799d7.shtmlI'm trying to do the upgrade us...

Hi,We have a pair of ACE modules running c6ace-t1k9-mz.A2_1_1a.bin. They are a redundant pair, one in each of two 6513s.A few weeks ago we had to reboot the active ACE as none of the load balanced services were working through it. We could access the...