jgervia_2

Hello, Couple of questions here. I can't find much documentation on 'pseudo-standby'. You can ping a...

Joshua, There are several bugs dealing with RST flags in the 7.0 code - I would try upgrading. I kno...

Are you receiving any log messages when it drops? If you do a 'clear asp drop', initiate the connect...

Hello, I couldn't say more without looking at your configuration, but I'd start out with a same-secu...

Hello, To see the version of the code you have to do a "show ver".The file named "image" is the FWSM...

Hello, The 525 is neither EOS or EOL at this point, and no dates have been announced. You can see th...

Hello, You can, assuming your pix has 7.2 code. The commandsame-security-traffic permit intra-interf...

Hello, You can't really remove the natting on the router or else your outbound connectivity won't wo...

Hello, Not sure if this is the issue or not, but a couple of things:1) Your default route next hop i...

Chris, Basically, you are double natting.You are hiding the 192.168.x network behind the firewall IP...

Nat order of operations: the access-list gets checked first and then nat occurs. The connection tabl...

Hello, Turn off the 'inspect h323" option in your policy map, and you should be working after that -...

Well, the pix considers the physical interface the 'native' vlan - are you sure the native vlan conf...