Hi All,I have a customer with two Datacenters in two locations connected through Dark Fibre. There are two Dark Fibre links for redundancy. The connectivity is like below:N7K-DC1---(1/1) <----------------------------Dark Fibre-------------------->(1/...
Hi,I am planning to implement UCCE 8.5/CVP for a customer. I want to know what is the best practice for AD integration, whether to use customer's corporate Directory or have a dedicated domain for UCCE?Can anyone point out any implications of both th...
Hi All,Is it possible to configure, when a caller makes an outgoing call, he will hear a prompt that "Your call will be recorded" and then he will be route through the dialed number?Is there any way to do with CUCM along with any other application?Th...
Hi,Anyone knows for the what's the command "local-alerting" is used for? This is used under voice-port configuration. I am not able to find any information regarding this command in the CCO. Please help.Thanks,Manu
Hi All, I have created a SIP trunk from CUCM ver 7.1 towards a Nortel PBX ver 5.0. The scenario is like:Phone A----->CUCM 7.1-----SIP Trunk--->Nortel CS 5.0-------> Phone BThe regions are configured to be in G.729. As per the interop document we have...
Hi,Can someone help on this, please?I have two sites connected over Metro Ethernet, and the links are connected to 3560-X switches. There is a MUX in between these locations, so it is not a Dark Fibre. But each switch can see the other device throu...
Hi Nikolay,Thanks for the response.I understood the limitations on 6548-GE-TX module.Can you tell me what is the buffer size per port for WS-4248-RJ-45 module and the subscription rates? I am not able to see this values in any of the Data Sheets.Tha...
Hi Nikolay,This is the setup.I have some set of servers. If we connect to 4248 module, there is no issue with the application.If I connect to 6548 module, the application is slow. From one technote related to WS-X6548 module, I understand that 6548 ...
Hi leolaohoo,Thanks for the reply. I got your inputs already from a Cisco URL. I understand that the buffer size of the 6548 line cards is 1MB per 8 ports.I want the same parameter for 4500 line cards., ie buffer size of each of the ports in WS-X424...
Hi Nikolay,I have a customer having a VDI server infrastructure. He is connecting his VDI servers to a Catalyst 6500 switch with WS-X6548 module. With this setup, he is having some performance issues where the VDI application is functioning very sl...
