About eric.stewart

eric.stewart · 12-11-2010

I'm still having problems associating with the access point. This is true whether I choose 2.4 GHz or 5 GHz radio operation and pretty much any security settings other than completely open security.Other nits pick:I think it's dumb that you can't ha...

eric.stewart · 12-05-2010

I have a Linksys WAP610N AP and a WAP54GPE. With neither of them do I have any issues with wireless connectivity with any of my wireless devices including the ones listed below:For example:My kitchen computer has an HP-branded Broadcom 802.11 b/g c...

eric.stewart · 12-03-2010

I'd like to configure WDS with the RV220W, but w/o the admin guide I'm blind. I see that the MAC Address I'm supposed to use for WDS is MAC Address:C8:4C:75:40:EF:DCI also see that MAC address as being associated with AP 1 (ie: the 1st AP on the R...

eric.stewart · 12-02-2010

The speed and duplex settings for LAN and WAN ports (LAN =1,2,3,4 and Dedicated WAN =5) should not be inNetworking->Routing->Port Management,The natural place to put them would be in:Networking->LAN->"Physical Port Settings" (ie vs. virtual port sett...

eric.stewart · 12-01-2010

Interesting result when I did an nmap scan of the RV220W fron an inside host:HTTP/0.0 400 Bad RequestSERVER: Linux/2.6.21.7-Cavium-Octeon, UPnP/1.0, Intel SDK for UPnP devices/1.3.1CONTENT-LENGTH: 50CONTENT-TYPE: text/html<html><body><h1>400 Bad Requ...

eric.stewart · 08-07-2018

Thank you very much for the prefix-list trick. I was puzzling over this myself and this forum post came up in my Google search. It's now working fine for me!

eric.stewart · 01-17-2011

Great work folks! I stumbled to this forum posting via Google as I was having the same problem. I'm downloading 8.3.24 (interim) and I will see if it fixes my problem.Thanks,/Eric

eric.stewart · 01-04-2011

Thanks Don. Will give it a whirl and report back.Hope you enjoyed your Christmas and that your New Year is a happy one./Eric

eric.stewart · 12-23-2010

The devices that cannot connect are:ThinkPad T400 notebook with Intel 5100 abgn cardHP Pavilion desktop with HP branded 802.11b/g cardProblem is both with 2.4 GHz and 5GHz radios./Eric

eric.stewart · 12-12-2010

Yes. I thought about the wireless interference angle, but I have my 3 wireless devices setup in 3 different non-overlapping channels. That said, it remains a good idea and I will take your advice. I will turn off a couple of things and try again....

Member Since	‎08-02-2007 05:25 AM
Date Last Visited	‎08-24-2018 02:02 AM
Posts	40

User Statistics

User Activity

Wireless Nits to Pick

Access Point Not working w/ all wireless cards

WDS Confusion :-p

Switch Port Settings Menu in Wrong Place IMHO

nmap Scan: Bit of Information Leakage from the RV220W

Re: AnyConnect SSL and Reverse Route Injection

Re: AnyConnect and DAP not working on ASA 8.3.2?

Re: Wireless Nits to Pick

Re: Wireless Nits to Pick

Re: Wireless Nits to Pick