Hello. Last Friday, for some reason, two IP Phone 7945's stopped forwarding VLAN IP's to PC's connected to it. Here's what we got: We have a Cisco 3750 with ports set up for VLAN 7 for IP Phones and VLAN 25 for Windows PC's. There are two IP Phon...
Hello. We have a 3750 which has a few vlans configured. One Vlan is for public access wifi and another for our security system (door access, cameras, etc.). I don't want the public wifi vlan to access the security system vlan. How can I accomplis...
Hello.We have a ASA 5520 which is configured to send log files to an ftp server. It has been doing that until recently I found out that it stopped sending the logs on August 11. I can't remember what I have changed in the ASA config to make the ftp...
Hello.I am creating a Remote Access VPN group with Radius authentication. Even though I put a check mark on the "Microsoft CHAPv2 Capable", the ASA uses PAP to request for authentication with our Radius server! Authentication is rejected because ou...
Hello. We have a ASA 5520 and we have all kinds of trouble on our ftp connections. FTP servers disconnect immediately when we issue a data connection like "dir" or "get". FTP client is in the inside from a Windows Command line. Windows ftp does n...
" show ip route" on the 3750 shows the public wifi vlan is "Directly connected". Can I enter a static route so that all traffic from the public wifi vlan is routed to the ASA's IP on the 3750???
Thanks. We have a ASA 5520 also connected to the 3750. I probably want to forward the traffic from the public wifi vlan to the ASA where I can farther create rules. How can I accomplish this on the 3750? Again, thanks.
Does anyone know why? AFAIK, nothing has changed on the ftp server side. Even though the ASA 5520 "Logging Setup" is configured to save the buffer contents to the FTP server, it is not doing so!Thanks for your help.
Okay. I have made the change to the tunnel group but still ASA is still sending negotiating PAP to the radius server. Below is the attributes of the tunnel group. What am I missing? Thanks in advance.tunnel-group Test-Admin type remote-accesstunn...
