HI Dustin, Non-Cisco WGB Support Starting in release 7.0.116.0, the controller software has been upd...

You can only configure DHCP server on cisco 5508 wlc and not as a DNS server or box.Thanks,Sri

HI NM,Please try on wlc cli config network mgmt-via-wireless enableconfig network mgmt-via-Dynamic e...

Hi bapatsubodh ,Start with Running a "debug aaa all " on the AP .Look for access aacept , fail or re...

Hi GN,you may try EAP TLS on WLC using local eap.have a cleint side cert created which is installed ...

Hi Jorge,Are you going to use Microsft 2008 server as NPS ( radus server) or are you trying to use A...

1.If one of the local controllers fail, all the APs at that remote site will fall back to the backup...

Hi , Is it a flat network i mean is the Linksys switch to which AP ,wlc and WLAN user as well as any...

You have the right 1140 Ap choice in that form factor being a 802.11n capable.3500 requires wlcSrini

1260 Aps currently are only offered as unified hence you will need wlc for it to work.Sri

Hi , Here is a link for external Radius server config http://www.cisco.com/en/US/products/hw/wireles...

Hi, Do you have default gateway configured on the AP and can you ping it from your AP. Just make the...

Did   you try rebooting the AP.