About PIKEYMIKEY

PIKEYMIKEY · 04-13-2021

I am trying to connect to a nexus switch from within the nexus CLI. I have tried ssh -l admin 10.10.10.10 but it is not accepting the command

PIKEYMIKEY · 06-11-2019

Hi, I am in a situation where I need to check the MD5 on the two WLC .AES images below. AIR-CT2500-K9-8-5-105-0.aesAIR-CT2500-AP_BUNDLE-K9-8-5-10 5-0.aes The "show flash:" or "show dir" command does not work on the WLC CLI like a router or switch so...

PIKEYMIKEY · 06-05-2019

Hi, I am having brain fog and wanted to know what is the best way to setup routing between two sites that are connected via a 3rd party managed LAN extension.The 3rd party is configuring all the site to site connectivity through their NTE and will pl...

PIKEYMIKEY · 05-15-2019

What are the basic requirements and commands needed to build a layer 2 transit network between two sites?Both sites will be connected by a 3rd party router which I do not have access to.I will have access to the 3850's on each site.

PIKEYMIKEY · 05-13-2019

I have been asked to do a few things which I am unsure about and wanted to know your thoughts on what is being asked. Obv I will go back to the person and ask directly but wanted to get other opinions first and a better understanding. The project is ...

PIKEYMIKEY · 06-06-2019

Actually after reviewing the config the core 1 switch connects directly to the FirePOWER and the 3rd Party router such as the image attached.the int it connects on is gi1/016 and its config is shown. Just a generic access port on vlan 902 nothing els...

PIKEYMIKEY · 06-05-2019

Hi, I've drawn out the diagram. As mentioned the ISP with be doing the link from network one to two I will need to do the routing. I am thinking I will need to create a new vlan interface on each side such as vlan 500 give it an new ip/subnet of 192....

PIKEYMIKEY · 06-05-2019

Ok so the security if needed can be added at a later date, but the SVI's should be enough to talk to each site?

PIKEYMIKEY · 01-18-2019

So you have computer that have both wired and wireless UP & UP? Yes I believe so. Are the wired and wireless IP address under the same subnet?No Wired use 10.12.242.0/25 and 10.12.241.0/25 If wired and wireless IP address are different subnet, RTP do...

PIKEYMIKEY · 01-18-2019

So you have computer that have both wired and wireless UP & UP? Yes I believe so. Are the wired and wireless IP address under the same subnet?No Wired use 10.12.242.0/25 and 10.12.241.0/25 If wired and wireless IP address are different subnet, RTP do...

Member Since	‎03-12-2017 11:27 AM
Date Last Visited	‎04-15-2021 08:56 PM
Posts	26
Total Helpful Votes Received	1

User Statistics

User Activity

How to connect to another switch via SSH from within a nexus CLI

How to verify .AES WLC image

Configuring routing for a 3rd party managed LAN exstension

How to build a Layer 2 transit network

Layer 3 switching for new site

Re: Configuring routing for a 3rd party managed LAN exstension

Re: Configuring routing for a 3rd party managed LAN exstension

Re: Configuring routing for a 3rd party managed LAN exstension

Re: Network issues when users connecting to WIFI

Re: Network issues when users connecting to WIFI