About ebanks2006

ebanks2006 · 08-22-2007

We have a 155Mbps OC-3 WAN link from our carrier. However, the carrier hand-off to us is Gig-E. We want to apply QoS to this circuit to prioritize important traffic.The question: since the carrier hands us Gig-E instead of native OC-3, will traffi...

ebanks2006 · 01-10-2007

For those of you running storm-control, I'm interested to hear where you set your thresholds. We're experimenting with a 10% gigabit host port and 15% gigabit trunk port threshold for both broadcast and multicast storms on the 3750 platform.We see t...

ebanks2006 · 01-08-2007

Can anyone point me to documentation explaining why I'd want to use a static route like this:ip route 10.1.2.0 255.255.255.0 Vlan100 172.16.1.1instead of a static route like this:ip route 10.1.2.0 255.255.255.0 172.16.1.1I've read the IOS documentati...

ebanks2006 · 12-13-2006

I need to add a prefix-list to filter outbound advertisements to an eBGP peer. Will I have to clear the BGP session for the prefix-list to be effective?

ebanks2006 · 07-28-2006

We need to change the hostname of a 6500 series router running native IOS. After changing the hostname, should we also regenerate our SSH/RSA keys? If we don't regenerate the keys, will this cause any problems?I believe changing the hostname causes...

ebanks2006 · 01-08-2013

Hey, Paul - can you clarify the problem you're having? I'm trying to grok what's broken. I gather that you've got a VoIP phone that isn't behaving as intended, but it's hard to tell from your description what all the circumstances are.I re-ordered yo...

ebanks2006 · 06-02-2008

At a glance, your VTP domains are synchronized - looking good from the output you displayed. The "master" (VTP server mode) is at revision 104. The "standby" (VTP client mode) is also at revision 104. Both switches have 34 VLANs.VLAN creation and ...

ebanks2006 · 05-21-2008

You need to use SPAN to see the entire VLAN traffic, both unicast and broadcast. The link I posted in the previous message explains how to set this up.I doubt you have a problem with broadcast traffic from what you have written. But let's assume, f...

ebanks2006 · 05-21-2008

I tend to agree with Andrew. If your network was truly experiencing 100% broadcast traffic in the sense that you mean it - i.e. all your segments full to capacity with broadcast frames - then your network would be non-functional.Is your network work...

ebanks2006 · 04-17-2008

I can't recommend a specific number of VLANs where migration to MST would be indicated. I can say that we run well more than 50 VLANs in our core in PVST+ mode. We use "switchport trunk allowed vlan" statements on the core-to-dist layer trunk uplin...

Member Since	‎01-31-2006 04:04 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	49
Total Helpful Votes Received	37

User Statistics

User Activity

QoS on OC-3 When Carrier Hands Us GigE

Storm Control Thresholds

Why a Static Route with Interface AND Numerical Next-Hop?

Will adding "neighbor prefix-list out" require a "clear ip bgp"?

Does Changing Hostname Require New SSH/RSA Keys?

Forwarding UDP port ranges, Cisco 870 12.4(15)T7

Re: How does HSRP works

Re: Reduce Broadcast frames.

Re: Reduce Broadcast frames.

Re: RSTP vs MST