Hello,I was wondering, if it is possible to use variable in a search string within a WHEN block:- name: Ansible site-ios-xe-L2-L3-Metrics-Check hosts: IDFiosxe vars_files: - /home/cisco/Ansible/vault_password.yml vars: ansible_become_...
Hello,I am working on a Metric check list including show commands.Some of those commands provide output with a delay or even require to hit "enter" to scroll further down.I was wondering, what the best approach would be to tackle this issue.Not sure ...
HelloI tried the following Ansible playbook, the goal is to change the ip helper address of an existing vlan interface.And I am receiving the following error: TASK [Changing IP Helper Address] *********************************************************...
Hello,I was wondering, whether it is possible to pull also the IP address in addition to hostname, pltaformID, sofwareType, and Version Excerpt URL:dnac = { "host": host, "port": 443, "username": username, "password": pass...
Thank you Torbjoern.Yes it worked by using the concatenation operator(~) as suggested by you.Is there another way to do or would recommend keep using the concatenation operator(~). Thanks..
@leo LahooYes I am aware of SSH issues in 3.11.9; Cisco should rather take it off the shelf.Yes, they do SSH.So it seems that DNAC does not support automation of c4500 upgrade process?
Ok. So let's assume ROMMON/Firmware is done.Does DNAC is at least able to push the image to the c4500 and trigger the reload?Anybody in this community have some experience with the question I am posting????
About 15 - why does number of Units matter.I am wondering, usually you have to update the bootvariance, write the changes to the memory.The rommon needs to be updated first.A lot of intermediate steps involved so not sure how DNAC would be able ton h...