In Australia. I will sell when I buy a new unit. There does not appear to be a cisco product that is...

thank you for clarifying the matter. I will purchase another device and throw the cisco in the bin. ...

To be clear my network has jumbo frame turned off in all devices due to the 887W being incompatible....

I do realise that 300 Mbps is a theoretical max. What I was trying to say was that I would expect to...

If I connect the desktop to the GB switch I get 50 MBps file transfer.The desktop is using wireless ...

I have two desktops and a notebook spread around the house. I find that when all the devices are off...

I have the 887W (probably the silliest purchase I ever made due to the 4 port FE switch when it shou...

Hi Scott,I see thatt when I select the default channel to be channel 11 as default it actually selec...

Hi Scott,I thought this too. Why does the unit say it has selected channel 10 when I chose channel 1...

Hi Scott,thank you for this information. I used 6 and below and it chose 5 I used 1 and above and it...

thank you for answering though I wish you did not. I'm looking for answers to the questions, not inf...

I have a question about 802.11n settings. I have the default radio channel set to 11 and the channel...

Hi, I'm not sure how to do that.I have a LAN subnet 192.168.1.0 with gateway 192.168.1.254 and this ...

Hi, I created a second VLAN and a second SSID. My problem is that from a PC on the native VLAN 1 I c...

Hi John,I will give this a go tomorrow, it is late here again.How does the actual route to the next ...