I have been using the Iphone4 Cisco Tech Support App for awhile now but on the latest update(about 2weeks ago?) I noticed when I drill down into the communities that the discussions are not in any particular order anymore. They used to be in order fr...
Hi,
It looks like you may have a firewall blocking the TCP callback from the node to the PC. You can test one of two things
Temporarily disable the firewall on your laptop/PC and connect directly to the node.Enable Proxy on the node while you have ...
You can use either or. TNC provides OSC where TSC does not. TSC is usually used for client shelves which hold Transponders. TNC is usually used for a line side shelf which hold the ROADM and amplifier cards. Thanks.
Hi phill00011, Windows 7 requires autotuning to be disabled in order to run CTC. Please see below for instructions. http://www.cisco.com/en/US/docs/optical/15000r9_2/dwdm/procedure/guide/454d92_ctcoperation.html#wp204480Complete the following steps t...
Hi Abdul,It all depends on a number of things. Is this point to point 10G LAN?Will any FEC options be used.Will there be DCU's to compensate for any Chromatic Dispersion on the span. Here is the spec sheet link.http://www.cisco.com/c/en/us/products/c...
Michael,Are the SFP's the same in both switches? I am thinking your issue is most likely an optical power issue without the media converters. The specs for the GLC-SX-MM(1000BASE-SX) are:TX -3 to -9.5dBm. Rx is 0 to -17dBM. Do you have the specs on t...
