We have an UC 540W and would like to do port forwards3389 to 192.168.10.10 3388 translated thru the router to port 3389 at ip 192.168.10.11Port 25 needs to only allow traffic from network 64.18.0.0-64.18.15.255 (or 64.18.0.0/20) (or 64.18.0.0 mas...
Hello,I have a UC540 depoyment along with SPA 508 phones and the local directory on the phones just displays extension numbers and not the Names. The names are empty. Please help.Regards,Jibu Mathews
Hello,I have added 2 SPA525G2's to a UC520 and the phes are not getting their configurations. The phones are getting their IP addresses but the dispaly does not show user or the lines. I am using CCA 2.2(4) I use the 525G phone load for the phones.R...
The issue was quite strange. Pressing page 2 in the Local Directory menu displays the names and extensions. Had a call with CISCO support Center and figured out that the CCA inserts additional epnhone-dn 's during the initial configuration. Removing...
Hello,Thank you for the detailed information and the responses are below.1. Test from other phones. Is the problem with just one phone, all SPA508 phones, or all phones in general? All phones including 7940, 7931, SPA 508, SPA525. Seems like a confi...
