Aha! I get it sir...So the WLC tags all packets that is came from wireless with VLAN 10 whenever the...

Thank you George for clear this up.So these are the conclusion:In multi WLC deployment, 1. the AP jo...

Thank you for your information sir.So are you saying we can monitor Cisco autnomous access points us...

Thank you for your explaination sir.So are you saying that wireless bridging is only established whe...

Umm, I can't clearly understand your meaning sir.After which point the WLC will then take the packet...

Hi Guys,Have you ever try using windows server 2008 SNMP to monitor cisco autonomous access points?K...

Great question sir!May I add a bit. Your question is in conditions when 2 controllers is both using ...

Hi Guys,I just installed ACS 5.1 using its ISO file in my VM Ware Player. The installations looks go...

Ok. Thanks for your help guys. Let met get this straight.When AP able to send discovery request to m...

But Wait a minute. If I create a interface VLAN on WLC, its primary port and back up port should map...

Thanks again, Scott. Hmm.. You are right. This is not best practice scenario.Our condition is we hav...

Hi Guys,Today I want to build a wireless bridge using AIR-AP1131AG (running WLC) and TP-LINK wireles...

Thanks Scott it really helps..But by the way, I'm not mentioning "interface for ssid" here. I only m...

Thank for your helpSo, port 1 will be connect to switch 1 and port 2 to switch 2.Port 1 and port 2 a...