About davy.timmermans

davy.timmermans · 10-04-2016

with ISE 2.1in case enable email notifications to guests has been disabled (unchecked)then it's still possible for a sponsor to select mail notification:If the sponsor (who is not aware of any policy/configuration) tries to send an email he'll receiv...

davy.timmermans · 05-25-2016

ISE 2.0 WLC: 8.1.131 Is the following normal behavior? dot1x enabled on 2700i ap, ap connected to port configured with dot1x step 1 event PAC Provisioned authC: ok --> success authZ: ok authZ result: <> result access reject eap-fast, eap-mscha...

davy.timmermans · 05-11-2016

In all examples of device self registration - authentication seems to be done only after the coa after registration? auth: mab : user not found - continue authz: if guestendpoint and ssid 'guest' => accept if ssid 'guest' : accept + cwa Thus o...

davy.timmermans · 04-20-2016

I would like to know when the secondary WLC in the HA cluster is active. This should be possible via CISCO-LWAPP-HA-MIB To achieve this I've downloaded Standard-MIBS-Cisco_8.1 and MIBS_8.1 from the controller software page. My problem is that I'm n...

davy.timmermans · 09-13-2011

I'm wondering if there's a best practice regarding the subnet size of the dynamic interface.Is for example a /16 recommended, knowing broadcast/multicast to the clients are disabled.I've a setup where via aaa override, the users are placed in their c...

davy.timmermans · 10-11-2016

your authz policy looks like: Profiled_7911 & member of allowed_mac It's normal behavior that the first time the authz rule is hit - but normally a coa should take place after a small time once ise receives new info from the sensors. You don't see...

davy.timmermans · 06-16-2016

Did you test it? object 10 not > when the next hop is not reachable, --> true Unless the next hop/eigrp neighbor will be reachable via the summary route.

davy.timmermans · 06-08-2016

Ran in this issue too after upgrading WS-C3750X-48P to c3750e-universalk9-mz.152-2.E4 no ip cef optimize neighbor resolution fixed the problem for me as well.

davy.timmermans · 05-25-2016

If you want to kick in the static route when the eigrp neighbor is not reachable - you could configure the following: I don't know if that is what you're looking for? ip sla 10 icmp-echo 10.128.193.125 track 10 ip sla 10 reachability ip sla ...

davy.timmermans · 05-24-2016

Correct, Once in VSS there's only 1 device to manage. I suggest also to have a look at the VSS design guide: http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Campus/VSS30dg/campusVSS_DG/VSS-dg_ch1.html

Member Since	‎12-09-2008 04:16 AM
Date Last Visited	‎03-05-2021 08:03 AM
Posts	268
Total Helpful Votes Received	348

User Statistics

User Activity

ise 2.1 'enable email notificiations to guests' - gui inconsistency

Cisco AP - as dot1x client -eap md5/eap-mschapv2

self registering guest flow - re-authentication?

Add custom mib to Prime 3.0

wlan - subnet size

your authz policy looks like:

Did you test it?

Ran in this issue too after

If you want to kick in the

Correct,