awinter2

Hi Peter,.png in 1280x720 should be fine. One thing to make sure of is that your USB stick is format...

Johan,so this VCS-E is behind a NAT of some sort? Does the VCS-E have the dual NIC option key instal...

The search history entry implies that this call attempt came from a locally registered endpoint:Sour...

Hi Johan,"Not accepting pre-loaded route headers" most likely means that the incoming SIP INVITE con...

Paul,as far as Jabber Video and Movi go, there is no way for these clients to know if they are locat...

Paul,When Jabber Video attempts to get provisioning configuration, the provisioning VCS will pick th...

The eventlog is stored in /mnt/harddisk/log/messages.Once the messages files reaches 10 MB or so, it...

Thomas,disabling SIP UDP should not cause any problems with provisioning or registration of Jabber V...

Not currently possible. With our current solution, the authoritativeness of a presence server for a ...

Hi Martin,FindMe and presence server needs to reside on the same VCS since this is currently the onl...

You can do echo "xStatus ResourceUsage" | tshfrom the root prompt, which will yield the following ou...

Hi Pieter,the 'xStatus ResourceUsage' command will give you this information (When run from an admin...

For provisioning with VCS and TMS, the TMS PE deployment guide would be a good start:http://www.cisc...