About luiz.alexandre.paiva

luiz.alexandre.paiva · 02-21-2011

Switch - Cisco IOS Software, C3750 Software (C3750-IPSERVICES-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1) interface Vlan1 description VLAN LAN ip address 10.193.21.1 255.255.255.0 secondary ip address 10.193.29.4 255.255.255.0 ip helper-address 1...

luiz.alexandre.paiva · 02-04-2011

Hi,We are migrating some access from Decnis into TCP/IP at X.25 links and we have XOT configured at our router.The point is that for 4 of 5 accesses this is working fine but at one of them not, and the following log is shown:Feb 3 14:46:51.138 MET: F...

luiz.alexandre.paiva · 08-05-2008

We are thinking on buying the spectrum expert solution, but there is a good question. Can an AP 1131AG be settle as sensor?Rds,Alexandre

luiz.alexandre.paiva · 07-03-2008

I need to intall 04 Aps in an area where all of them have contact. I now know that the best practice is to use the three channels combination, but what would be the best way to do it? How could I use the 4 APs considering that two of them will be in ...

luiz.alexandre.paiva · 06-03-2008

I have some printers that when show problem and we have to replace, the MAC-to-IP mapping remains at core and even when deleting manually it doens't work. If we use a different IP address at same network it works perfectly. After a lot of time (belie...

luiz.alexandre.paiva · 03-01-2011

we have solvet this by creating another connection with the router, but it was very nice to be back to routing basics and remember this. sometimes we look for super complicated problems and the answer is close and basics.Thanks for the help,Luiz

luiz.alexandre.paiva · 02-21-2011

Hi My friends,The problem is the following:When set the secondary address at VLAN 01, at 3750 switch it works from other connected Vlans locally at this switch, but from remote sites coming through the WAN not, not even from ISP router.But, at same s...

luiz.alexandre.paiva · 02-19-2011

Hi Sakella,You've really got the point because we found out that historically used the window size as 3 but at SP it was set as 2.For other 3 suppliers it never became a serious problem or even was noted because when this happens, communications was ...

luiz.alexandre.paiva · 07-04-2008

Hi,Thanks for your feedback.rds,Alexandre

luiz.alexandre.paiva · 07-03-2008

Hi,Thanks for your feedback about the power levels, do you know where can I find the material about it? And about the antenna we haven't purchased no external antennas, so I believe that will have to deal with power level.Rds,Alexandre

Member Since	‎01-24-2007 05:56 AM
Date Last Visited	‎10-09-2017 01:45 PM
Posts	48

User Statistics

User Activity

Routing problem adding secondary address at interface Vlan1

X.25 XOT communication not working

Using Cisco spectrum expert can an AP(1131AG) work as a sensor?

APs AIR-AP1131AG-A-K9 channels distribution question.

ARP not renewed at switch port

Re: Routing problem adding secondary address at interface Vlan1

Re: Routing problem adding secondary address at interface Vlan1

Re: X.25 XOT communication not working

Re: APs AIR-AP1131AG-A-K9 channels distribution question.

Re: APs AIR-AP1131AG-A-K9 channels distribution question.