I need to redistribute some OSPF routes into EIGRP.  pretty simple.  But I built a filter (for testing basically) to limit what routes get put in.  Like so:ip access-list test-distrib-ospf-to-eigrp10 permit ip 10.120.32.0/24 any route-map ospf-to-eig...

Thought I posted this yesterday but i don't see it in my discussions so adding again. Sorry if it made it but my profile didn't get updated.   We have a legacy network, 10.20.1.1/16.  It has been "self governed" to have internal break outs  of usage ...

we have 2  N7k's connected with VPC.  Off of the 7K's we have 24 floors with a stack of 3850's in each floor.  We are not using VPC to the floors, instead each 7K has a single run to the 3850 stack each a numbered interface with PTP link.  For years ...

according to this document: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/epc/command/epc-cr-book/epc-cr-m1.html#wp3379948068   I should be able to issue this command: monitor capture CAP export tftp://10.4.72.12/CAP.pcap and my capture buffer sh...

replacing 3750's wih 3850s.   Previously had 4 ports in a port channel that formed a trunked uplink.   I also had a port that lead to a VM server which we treated as a trunked port so it could carry various vlans.  In duplicating that set up on the 3...