Hi All,
I have a 6807 with the following cards installed, I can find an EoL notice for WS-X6704-10GE for the 6500 chassis but nothing for the 6807 chassis they are installed in. If a card is end of life for the 6500 does it make it end of life for th...
Hi all,Hope this is quick win question. I have a Cisco ASA 5510 running 8.4 with ASDM 6.4. I've configured the ASA to terminate IPSec VPN clients successfully using the Cisco VPN client, we also have a couple of users with Anyconnect clients for IPSe...
Hi All,I currently run a VPN to a third party. We dont have any issues with the communication generally and I've tested traffic to the web application from user PC, through the firewall and to the appliocation itself. A TCPING shows a timely connecti...
Hi All,I'm looking for a solution / guide that will enable our ASA 5510, Firewall V8.4(5), ASDM version 6.4(9) to support Active Directory users. I want to enable our administrators to access the ASA via ASDM using their AD accounts (A local admin ac...
All,I currently have an ASA5510 with 2 interfaces (outside and Inside) running remote VPN for clients and L2L VPN for a couple of sites. I have traffic entering the inside interface, matching interesting traffic, being wrapped up in IKE / IPSEC and s...
Hi All,Thanks for responses. Managed to solve the problem by adding a management ACL on the outside. I wanted to deny requests to the ASA not through it, anyway that solved the problem so if anyone connects to the outside interface the ASA doesn't r...
Hi Sandy,We've pre-depolyed our 2 anyconnect clients, so we use IPSec to connect, if you follow the anyconnect wizard step 3 (VPN Protocols) you have an option to only use IPSec and turn off SSL. We're not using SSL for deployment of these clients.Th...
Thanks for your reply, appreciate that. There are some suggesstions I can use from the above post. I'll try hand coding this again too as most people advise not using the GUI. Its a frustrating configuration in that it encapsulates the intersting tra...
All,Think I found an answer to this already, checked the server and think this code is embedded in a PHP file and then optimised by ZEND so the code is encrypted. I was hoping it would be an XML or config file but there you go ...
