Does anyone know if this feature has been released yet? Looking at this getting with working with a quadcam and PTZ. Currently the PTZ is just focused on the presenter. Any info would be appreciated. Thanks!
Long shot here but figured I'd ask..... We have a conference setup with a room kit eq on one wall and board 75 on the opposite wall configured in companion mode. we would like to use an external camera on the board side, currently it's connected t...
WLC9800... I have a SSID with CWA with ISE working just fine and another SSID using MAB. Customer wanted to collapse these SSIDs into a single one and use MAB first, if that fails then redirect to the CWA portal. Since the authentication piece is ...
CUBE configured with dial-peer pointing to IVR system, calls originating from outside users that don't have the same carrier as the provider for this SIP trunk work just fine and their payload is showing as 101. only calls originating from the same ...
cisco codec pro, have a screen in the front of the room and a screen in the back. Is there a way with a ui extension / macro to change the source so if the user wants to change the source, they can? i've only seen a way to change it within the code...
is there another tool others are using or just live testing in an environment? I searched and searched and can't seem to find anything, figured I'd ask.
The solution for this scenario was to add "security web-auth on-macfilter-failure" under the wlan as even if the device was in the MAB group in ISE, they were still getting redirected to the web-auth page which was not the desired behavior. Once tha...
thanks for the response balaji, I'm not seeing authentication profile order on those links. I see the multiple authentication methods but the customer doesn't want both, if certain users are in a MAB group when they connect to this single SSID, they...
