HI Team
Can you kindly share the details of Cisco 860 router whether this router supports BGP or not ?
Cisco IOS Software, C860 Software (C860-UNIVERSALK9-M), Version 15.0(1)M7, RELEASE SOFTWARE (fc2)
Thanks
HI We have bought new ACS5.6 SNS3415 Boxes , earlier we have ACS4.2.1.15 , now we want to migrate the data from old ACS to new ACS. We have downloaded the ACS and trying to install 4.2.1.15 but getting the error" ACS4.2.115 can only be installed o...
Hi Team we are going to implement N+1 HA cisco WLC high availability for that we have procured one WLC 5508. However i am not able to find out difference between N+1 and secondary WLC configured under each AP in wireless tab ? As per my understanding...
Hi Can we make Nexus7009 as an NTP server. Basically we are craeting one MGMT vlan with HSRP configured between two chassis. HSRP IP want to use as an NTP server IP . is it possible and if yes , what will be the configuration for NTP?
Hi We have Cisco 4510 R Switch with two 14000 DC power supply .This DC supply is getting the power from two AC external power shelf. Now we need to to use the fully loaded chassis but somehow we are not able to use it because of power unavailability...
Hi Scott Thanks a lot for the information .This is very useful.However i need one small clarification..There are three redundancy model.. 1+1 where you need one WLC acts HA SKUN+1 Where one WLC is backup for all N WLCThird and last one is , where we...
Hi Leo This part we have done but not helpful.I think the problem in AC external power shelf that is providing the DC power to switch. There is an RJ45 port on power supply , how can i use that port ?The one RJ45 also available on Tyco NP2500 Extern...
Hi We have configured one command for dc input voltage 7500. ------------------ show module ------------------Chassis Type : WS-C4510RPower consumed by backplane : 40 WattsMod Ports Card Type Model Serial No....
Hi Kindly find the attached output GGN01-AS-4510-03#sh power inline Available:6177(w) Used:1655(w) Remaining:4522(w)Interface Admin Oper Power(Watts) Device Class From PS To Device ...
