Hi everyone,I have a Catalyst 4510 that is running IOS version 15.X that has a bug and Cisco recommends upgrading the IOS.  Are there additional steps required to perform an IOS upgrade due to licencing  Cisco put in place?Thanks in advance Erik,,,, ...

Hello everyone,1 day and 2 hours ago I cleared the counters on a SVI on a 6509 running IOS.  Since then the interface has received 1386034 broadcasts (89547 IP multicasts).  I have a few questions about the interface's broadcast counter:1. Is there a...

Hello everyone,I will be converting our 6509 switches from hybrid to native mode, I have checked the Cisco doc and had a Cisco tech. check my procedures that I will be using for the convserion. I was wondering if anyone else has done this conversion ...

I would like to clarify something about VTP, if a switch is in server mode without a domain name will it use the first domain name it receives from an advertisement and become part of that domain? ThanksErik,,,,,

During a conversion from hybrid to native mode the config-register of the RP and SP need to be changed so the RP and SP bootup in ROMMON. Once a reset or reload has been entered and the ROMMON cli is showing, how do you tell if you are in ROMMON mo...