About slmansfield

slmansfield · 04-09-2013

I have searched CCO and can not find a document that provides the throughput of an 815 model router. I found this document that lists some other 800 series models but not the 815.http://www.cisco.com/web/partners/downloads/765/tools/quickreference/r...

slmansfield · 04-09-2013

Thanks for the responses. I am trying to find some documentation from Cisco that proves that this router is considerably under-powered for today's broadband offerings. I thought maybe someone who has access to Channel Partner documentation might f...

slmansfield · 06-18-2010

Federico provided you with a method that uses Port Address Translation to overload the 192.168.16.x range to the inside interface of the PIX, which has an address in the 192.168.15.x range. Using this method will not result in a duplication of addre...

slmansfield · 06-18-2010

If I understand this question, this person wants to NAT the 192.168.16.x addresses to a 192.168.15.x address pool to match the ACL permit rule on the MPLS routers.If you do this, you will likely create duplicate addresses. For example, if you have a...

slmansfield · 06-17-2010

Could you provide a sanitized listing of your central site VPN device as well as another (working) site's configuration?

slmansfield · 06-16-2010

The "modem enable" command under the console port (line con 0) toggles between console port access and aux port access. They are mutually exclusive. However, you can configure "modem InOut" under line aux 0 to allow you to dial into the router via ...

Member Since	‎11-04-2002 08:32 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	322
Total Helpful Votes Received	101

User Statistics

User Activity

815 Throughput

815 Throughput

Re: Using NAT to nat VPN IP Addresses to internal IPs given out

Re: Using NAT to nat VPN IP Addresses to internal IPs given out

Re: Can't Access LAN - VPN 880 Router

Re: Aux/Console dialbackup on 871