Dears, I have one question about get vpn, we have getvpn from HO to branches. branches does not have internet, they access only HO apps. My question is that when i was enable ip accounting on outside-interface of branche router, i see the lots of b...
Dear All, I used two sf-300 switch and create 4 vlans and intervlan routing is working fine.Port 1 - 10 -------------> Vlan 1Port 2 -20 ----------------> Vlan 2Port 3 - 30 ------------------> Vl...
Dear All,I have some problem in my small network.I have 2 SF-300 48 port switches and connected to 847 router for intervlan routing. I configure 7 vlan in SW1 and uplink to SW2 with trunkport. The problem is that if i used default gateway for users...
I have some issue from last 2 month on sf300.The problem is that sf300 does not support complete dhcp, for that i put different internet modem.I connected one internet modem in vlan 1 so users from that vlan can access internet and default gateway is...
Dear All, I have some problem in my small network. I have two sf300 switch and configure nealry 8 vlan in sw1. sw1 and sw2 connnected through trunk.1 - 8 ports are in vlan 11 - int vlan 10.1.11.250/249 - 13 port are in vlan 12the problem...
HI guys, In getvpn HO to branches, branches does not have internet and when was try to ip accounting on outer interface of branch router, this is local ip address hitting to public ip address. anybody can tell me how i can filter this and...
Dear Dargiel, Really i appreciate your support and thank for that. Please my attached configuration which i was done but still vlan 1 not communicate with vlan 3,4,5,6,7.SW1= with vlan1,2,3,4,5,6,7 with ip address 10.1.x.0/24 10.1.y.0/24 and...
Hi aleksandra, Thanks for your email, as per your email i need to make dhcp on router and put static route in 2 switches to router 10.1.6.254 right then i can access all vlans & default gateway svi interface ip created on sf300 switch, and pool c...
Hi tom,thank for your email, i was try to put static route in the modem like thisip route 10.1.1.250/24 Wan interface ip address of Modem --------------> 10.1.1.250 SVI ip addressbut this is not working. i can do internvlan routing by removin...
