I have a 5506-X to be used with a cellular modem attached to a 2nd interface for redundancy. The ASA is using IKEv1 for redundant tunnels as well. Through the VPN I can connect to the inside interface of the ASA as well as devices behind it.   What I...

I have a 891F router that was intended to connect via the SFP port to a IE3000-4TC. One pair of SFPs (GLC-FE-100LX) were purchased. Both appeared as compatible in the compatibility matrix.    However on the 891F I have speed 100 hard set, unable to c...

In PacketTracer 7.1. the WS-C3650-24PS is able to do 1:1 static NAT. Recently for a project we got in a WS-C3650-24TS, for which 1:1 NAT was not an option. I did a quick Google search and found most commented was that the L3 switches do not do this a...

I am trying find a solution to having snmp trap sent from the ASA, but delayed by 1-2 minutes after the event that triggered.   Background- The ASA is using SLA feature providing redundant backup on 2nd interface connecting to a cellular modem. The A...

I have 3 IR809 routers that will use directly connected ethernet radios with cellular interface as backup. R1 is the primary (CTU) with R2 & R3 each needing to independantly tunnel back to R1. I have tried ip sla, and while that in itself works, the ...