this combination is pain. can't see anything legid in this sdl filewhich traces do we need to have e...

i had the same problem. 3925 running 151-3T. we got a new isp link that required glc-sx-mm. the link...

this is what i currently havebut with this setup cannot pass FCOEwhen i try associate the vfc interf...

i wanted to have 4 10GB links out of each FIyour solution only has 2 out of each FInow i have 2 inte...

it appears that when you can't bind the vfc interface to a portchannel with more than 1 link.i have ...

you mean single uplink to your network or to your server?i have 1 vnic assigned to the servercan you...

did you find the solution?usually when connected to the traditional switches you do static arp and t...

the backup link will be from the inside interface. coming off lets say mpls network or another vpn d...

this might be a problem since the remote host will respond to icmp going via the backup link.

i configured RRI on my asa for a site to site vpn tunnel. however when the tunnel is down the route ...

i see a newer firmware available SA500-K9-1.0.39 and still says the above bug is a known issueare yo...

we had this issue today as well. we have 2 routers connected via a ds3 running ipsec encryption betw...

i have created a tac request and the tech said there is a bug in the ios i am running. the new relea...

same thing.i forgot to mention the equipment i am using, i have an ASR1002 with adventservices.

i am trying to create ssh keys so we can remotely ssh to the router. however i am getting the error:...