About Jeremy Phillips

Jeremy Phillips · 03-07-2012

There is no WLC. The nearest WAP with that same channel is on the floorbelow. I will check tomorrow ...

Jeremy Phillips · 03-07-2012

Sorry it has been a few days. Things have decided to fall apart here just before spring break. I hav...

Jeremy Phillips · 03-05-2012

They are mounted on the wall in the hallway below the ceiling inside anenclosure with the antennas s...

Jeremy Phillips · 03-04-2012

I know there is no other mesh network around. This is inside a school district in poorer side of tow...

Jeremy Phillips · 03-04-2012

It is the 1231G. It is only using the 2.4Ghz. The WAPs are in thehallways. The walls are cinder bloc...

Jeremy Phillips · 03-04-2012

The signal strengths inside the classroom are -89 to -94dbm on average. Sometimes -98dbm. Outside wi...

Jeremy Phillips · 03-03-2012

I have a program on my laptop that detects ssid and tells you what the dbm is and what channel the s...

Jeremy Phillips · 03-03-2012

I have a lot of cisco 1231G APs in our school district. Recently they were having issues with the si...

Jeremy Phillips · 02-16-2012

Hi guys,Thank you for the help. As I thought some more about how this is routed from the wired vlan ...

Jeremy Phillips · 02-09-2012

Thanks guys. These ideas pointed us in the right direction. I am going to get with our Hardware Spec...

Jeremy Phillips · 02-08-2012

I attached a document to the original message. This is showing the show ip mroute and debug ip mrout...

Jeremy Phillips · 02-08-2012

Thank you very much for the reply. That is what I was thinking also. I am just the only one for the ...

Jeremy Phillips · 02-08-2012

Hi everybody. Have a question that I need confirmation on. I have several schools that use programs ...

Jeremy Phillips · 02-03-2012

That was it thank you very much.

Jeremy Phillips · 02-03-2012

Sorry, forgot to go to global config to turn on the logging to the monitor.These are PRI circuits.We...

Re: No signal broadcast