Hello,
I want to check with you if someone already ran into this problem, my scenario is quite simple:
4500 or 3850 as access --- 6807 as distribution
The access layer is configured with DHCP snooping and no ip dhcp snooping information option, th...
Hello,
I would like to know if you can help me before I open a TAC case. My problem is quite simple, my scenario:
Laptop (no supplicant) --- SW (WS-C3560-CG) --- SW (Internal resources) --- ISE
From the laptop I'm trying to webauth with the "new c...
Hello,
I hope that you can help me figuring out why am I not able to see any EAPoL messages on my remote SPAN port configuration, this is my scenario:
Laptop (authenticating) -- Switch1 -- Switch2 -- Laptop (Monitor)
For more detail scenarioLaptop --...
Hello team,
I was wondering if it's possible to create the next scenario where I want to connect a Cisco Router 1841 directly to a GPON (Gigabit-capable Passive Optical Networks), here is my network diagram:
I was trying to configure Cisco SSL VP...
Hi,
I hope that someone can help me resolving this issue that I'm having with RTBH, this is my scneario:
R1 ---(RIPv2)--- R3 ---(RIPv2/iBGP)--- R2
R3 --- PC
The PC is making a DDnS to R1 loopback address (150.1.10.1/32)
I want to implement RTBH ...
Joe,
After reviewing the whole thing I validate that I don't need to update with a specific IP since automatically the http will receive the public IP so I'm trying to make a TCL quite simple but I'm not sure how to do it, if I use tclsh to test ev...
Joe,
The base of the update is (example update request string):
http://username:password@dynupdate.no-ip.com/nic/update?hostname=mytest.testdomain.com&myip=1.2.3.4
This is kind of the same tool like dyndns: https://www.noip.com/integrate/request
...
Hello Joe,
By mistake, I forgot to apply authorization bypass. After I add that option on the policy everything went perfectly. Now I have 2 questions, I've been trying to manipulate the ddns with the update from the script that you sent:
::cisco...
Hey Joe,
Thanks for the support. I added the TCL that you suggested but I don't see any result, actually when I run the applet I lose ssh prompt for about 15 seconds, I think because the script is running, here's my output from the log:
Log Buffe...
