About erik.kneebone

erik.kneebone · 07-27-2015

Hello all,Thank you for taking the time to read this. We are having users who are able to connect to our client AnyConnect VPN, but are unable to pass traffic. It appears to be random. We have had several users reboot, restart, and reinstall their cl...

erik.kneebone · 10-14-2014

All,I have a WS-C2960C-12PC-L which I am trying to access. The console settings have been changed from the default and the configuration is unknown as the switch used to be a test switch. I am unable to determine any usable information via CDP Neighb...

erik.kneebone · 10-11-2013

Question for those in the know as I have not been able to confirm this. The course work covers AutoAP, LW AP's with a WLC, and touches other hardware types as well. My understanding is the config work involves the switch setup, both types of APs, APs...

erik.kneebone · 04-25-2013

I am looking for some assistance with the following setup for BGP with the following conditions:Client has two 2900 routers, each connecting to a seperate ISPClient has a Sonic Firewall with a link to each routerClient owns their own /24 block of pub...

erik.kneebone · 09-25-2012

Hello all,I have a client that currently has two 4 port FXS cards, VPN Module, and a T1 and the client would like to add 4 more ports. I do not believe the router can support it, but want to be sure. Here is the show version and the slots al lthe car...

erik.kneebone · 08-10-2015

Due to the high impact of this problem we upgraded to 9.4(1) which is presenting it's own problems as well, but they are at least manageable. We attempted multiple versions of the AnyConnect client and no luck. It seemed there was no reliable combo. ...

erik.kneebone · 10-14-2014

As I stated, already did that twice with different terminal programs and using both the RJ-45 and USB ports on the device, every setting from 300 to 115200 and few of the higher ones using Teraterm. I've also tried different data, parity, stop, and f...

erik.kneebone · 10-11-2013

That is what i'm looking for. The ultimate goal is CCNP level work for site surveys, then moving on to full CCNP. We are regularly deploying WLC's base in a colo and serving multiple locations as well as locations with 10+ AP's and VoIP wireless phon...

erik.kneebone · 04-26-2013

Blau,I appreicate the response! I am going to test the configs out, that looks very well put together! Thank you for including the Sonic configurations as well. I've never worked with them so that is a big help.

erik.kneebone · 04-25-2013

This is the network drawing I put together, not my strong point, hope this helps clarify.

Member Since	‎10-26-2007 06:37 AM
Date Last Visited	‎03-19-2023 09:35 PM
Posts	53

User Statistics

User Activity

DTLS-Tunnel not passing traffic when VPN is connected

WS-C2960C-12PC-L Unkown Console Settings

640-722 CCNA Wireless Hardware

BGP Setup with 2 Cisco routers and one Sonicwall

Maximum FXS ports on a 2801 router?

Due to the high impact of

As I stated, already did that

640-722 CCNA Wireless Hardware

BGP Setup with 2 Cisco routers and one Sonicwall

BGP Setup with 2 Cisco routers and one Sonicwall