We are having single spit deployment. while sending the CMA invite,
It showing the login domain twice.
click to join: https://URL
or call in:
- video system, jabber or lync: name@domain@domain
idly it should be name@domin.
We dont have branding l...
Hi All,
We have a non live infra and its a single combined server, want to know if we change its admin and interface a ip address, what else will get impacted on CMS side.
Hi All,
I was going through the CMS deployement guide, and while reading the section 7.1 Lync clients dialing into a call on the Meeting Server.
Ideally will required a lync side configuration and on CMS we should be configuration the incoming call ...
Hi,
We have an issue where we are routing a call through CUCM cluster --> CUBE 1 and cube 2 in a round robin fashion--> which sends the call to Trunk towads ESBC of ISP.
Now the issue is when the CUBE 2 link towards ESBC fails, can CUCM able to dete...
Hi All,
Need your help to understand the CUCM cluster sizing.
The maximum number of nodes allowed in a cluster are 21.
Out of which how many can be subscriber and for what purpose we can use them.
out of 21 we can use 1 Pub node 2 TFTP node and 2 Mu...
In the active directory configuration, under Field mapping expression, below configuration is there.
Username: $sAMAccountName$@domain
So,
I change the Space URI user part as: $mail|'/@.*//'$ (this is the change which resolve the issue)
which res...
as its a single combines deployement I dont know it will effect anything --
1> there is no DB reploication so no need to change IP there.
2> no SIP edge to change the IP
If I am missing naything plz let me know
Thanks,
Prasad Paradkar
Hi Chet,
As Patrick suggested this could also happend because of the wrong domain configuration.
There is a similler discussion which can help u to resolve your issue, please check the link below.
https://supportforums.cisco.com/discussion/13180411/c...
can you check in the logs whether the SDP negiotations for the Video is happening or not?
also check the CMS logs for more details or please share the CMS logs.