About sdeltoro1

sdeltoro1 · 03-09-2015

What is the resolution to successfully integrate TMS 14.1 to Conductor 3.0.?.VCS 8 is integrated to conductor via B2BUA, but using Policy same result.TMS successfully creates conference on MCU that is behind Conductor. the problem is that Conference...

sdeltoro1 · 10-01-2014

Hi,I can't connect to webex invitation via iphone jabberwhen I receive the invitation message on iphone jabber and push the connect invitation botton, my iphone invoke thewebex app and message error 100203 appeared, " contact webex support".Note: I ...

sdeltoro1 · 06-10-2012

I Have AIR-CT5508-K9 software version 7.2.103.0 the aps after a couple hours get next cleanair error:Cleanair sensor status down error code: cleanAir sensor is not operational due to crash please reset to resolve problem I updated latest version :7....

sdeltoro1 · 05-21-2012

Hi guys a very easy question:what is better? or if exist another best-practices please tell me.consider the fact only 1 ssid, 2000 user on same building (4 areas, not separete areas, they are very close)1.- one network mask /21? for whole building?....

sdeltoro1 · 09-07-2011

I notice after applying service-policy output on virtual-template (after doing auto qos voip fr-atm), crash router or when reload never come up. Is anything I should consider?. the workaround is shut and not shut serial and no frame-relay interface ...

sdeltoro1 · 05-23-2012

thanks Guys, I will implement using one subnet, what version is your WLC and if the broadcast is enable for default or must be disabled?.thanks

sdeltoro1 · 03-25-2010

I have captured on ethereal and I can see what is happening before restart the cumputer. on the message send by computer that cant hear. not rx packet.this computer send a message skinny open receive channelAck that informt what is his ip address an...

sdeltoro1 · 03-22-2010

I made test calling even from agent to agent on same subnet and no audio on agent having problem, the phone display the rx 0, and the problem happends on one pc on time, only one, maybe one day, or two later the same issue on another pc. without relo...

sdeltoro1 · 02-09-2010

the Customer has a Unity too. soo I move the AA on unity and the call.manaer after 6.x has a service parameter: Display Original Calling Number on Transfer from Cisco Unity . Now the original number is shown

sdeltoro1 · 06-04-2009

Thanks nicmatth, this work fine on the 2 ways.I really appreciated that

Member Since	‎05-28-2006 01:30 PM
Date Last Visited	‎08-15-2018 02:19 AM
Posts	86

User Statistics

User Activity

TMS-conductor Schedule error "Instance allocation failed: Guid should contain 32 digits with 4 dashes"

I can't connect to webex invitation via iphone jabber

Cleanair sensor status down error code

IP Addressing on High Density Wireless

service-policy output on virtual-template crash router

IP Addressing on High Density Wireless

Re: ip comunicator suddenly stop receiving rtp, reload pc work a

Re: ip comunicator suddenly stop receiving rtp, reload pc work a

Re: Display Original Calling Number on Transfer from IVR

Re: mgcp fxs to remote site g729, silence heard