About sjohnston

sjohnston · 01-17-2017

No, Swathy; I simply piggy-backed on a little-used POTS line. About a year ago, we moved all fax ser...

sjohnston · 03-04-2014

Thanks, John, but we have tried making the call with and without the prefix 1. Since the destination...

sjohnston · 07-23-2013

Thanks, Jonathan; I believe use of the Multiple Login Behavior service parameter will do the trick.T...

sjohnston · 07-19-2013

I don't believe there is a way a user can remotely log out of EM, but I thought I'd check with the c...

sjohnston · 09-27-2012

Good answers, all. I'd forgotten about the SCCP issue. Rob, the Polycom suggestion seems like the be...

sjohnston · 09-27-2012

A few of our overseas sites are supported by a Mitel 3300 MXE IPT system, but there is interest in u...

sjohnston · 09-20-2012

We're running CUCM 7.1 and today a user could not login to EM. Her end user config had no controlled...

sjohnston · 05-22-2012

Yeah, Rob, one of our telecom staff has verified this. Thanks for the thought, since this is one of ...

sjohnston · 05-22-2012

We're running Unity 7.0{2] w/CUCM 7.1.3. In almost 4.5 years, we've never run into a situation like ...

sjohnston · 04-20-2012

Thanks; that did the trick!

sjohnston · 04-20-2012

Running shutdown / no shutdown on a dial-peer in config mode to clear the counters, but counters don...

sjohnston · 11-12-2009

Thanks much!

sjohnston · 11-11-2009

Hi, all. We're running CME 7.1 at a site where a couple of analog extensions are defined in the gate...

sjohnston · 11-04-2009

OK, thanks much...Steve

sjohnston · 11-04-2009

This is the info I rec'd from the doorbell provider:The PO-5 can be put in a line position or in a e...

No, Swathy; I simply piggy