About mhmservice

mhmservice · 06-22-2021

Good afternoon We have an alert in our FMC that I am unable to clear: This was caused by adding then removing an interface on an FTDv VM in Azure, It looks like this bug Bug Search (cisco.com) but apparently this was fixed in a previous version, We...

mhmservice · 05-04-2021

Hi allOur CSR1000v HA in azure stopped working so I decided to rebuild it based on my notes from our previously working configurationI destroyed and rebuilt guestshellBut when I try to install the HA package within I get this error [guestshell@guests...

mhmservice · 02-12-2021

Hi all I have a FlexVPN setup with 2x WAN routers in a branch (let's call them R1 and R2) connected to 2x hubs (HUB1 and HUB2) R1 and R2 have a single ISP line each Hub 1 Loopback = 1.1.1.1Hub 2 Loopback = 1.1.1.2R1 Loopback = 2.1.1.1R2 Loopback = 2....

mhmservice · 02-05-2021

We have a number of ASA5506 running FTD 6.2.3 managed with FMCOne of the devices is not sending heartbeats to the management even after a rebootI logged in to the device over SSH and found that "show managers" command doesn't show anything:> show man...

mhmservice · 02-03-2021

Hi all I have 2x 5508 in SSO mode I performed a failover test (by executing command "redundancy force-switchover" and after the standby controller rebooted, HA seems to no longer be working:From active controller (Cisco Controller) >show redundancy s...

mhmservice · 06-04-2021

Rebuilt it with version 20.4.1.2 and it worked ;\ no idea why...

mhmservice · 05-05-2021

Managed to figure this out, there was an ACL on the interface on the Gi1 interface of the router blocking the traffic. Fixed that and was able to install the guestshell HA package without problems.Did an upgrade to the recommended OS 17.3.3 so hopefu...

mhmservice · 04-23-2021

I managed to hack my way around this using flexconfig, for example: dhcprel enable inside Replace "inside" with the name of your VLAN interface (you can't put "dhcprelay" because it's not a supported command....) Raised a ticket with my reseller, hop...

mhmservice · 04-22-2021

Did you solve this?I've hit the same problem on my FMC (6.6.3) with FPR1010 (FTD 6.6.1)Can't configure a DHCP relay for VLAN interface... absolutely useless product...

mhmservice · 04-21-2021

TAC didn't give me any other options than to reimage the device. Was a real pain to get someone on site to connect a console but eventually managed that and did the reimage. Reimage solved the problem but it really makes me worried some more may fail...

Member Since	‎03-20-2017 01:18 AM
Date Last Visited	‎06-23-2021 12:47 AM
Posts	54
Total Helpful Votes Received	11

User Statistics

User Activity

FMC interface status alert not clearable

CSR1000v on Azure cannot install HA v2 in guestshell

Routing FlexVPN loopback through another router when tunnels are down

Help! FTD dropped off management

WLC 5508 pair, redundancy not working

Re: vManage not doing anything..

Re: CSR1000v on Azure cannot install HA v2 in guestshell

Re: Firepower 1010 VLAN and DHCP issues

Re: Firepower 1010 VLAN and DHCP issues

Re: Help! FTD dropped off management