About zhang-hao

zhang-hao · 04-05-2006

sysObjectID 1.3.6.1.4.1.290 of 7507mx cannot be resovled with mib II. 7507mx's ios is rsp-jsv-mz.122-8.T10.bin.I'd like to know if there's any package for RME3.5 to get 7507 managed. Any advice is highly appreciated.

zhang-hao · 10-27-2005

After replacing a crashed ws-x6k-s2u-msfc2 for a 6513 swich, the new engine cannot be displayed in CiscoView 5.5, but other modules shown correctly. The snmp configuration in not changed and the ios version is c6sup22-jsv-mz.121-11b.EX1.bin.How can w...

zhang-hao · 09-21-2005

Becides MIB 2, any private cisco mib supports that?

zhang-hao · 04-05-2004

It's said that 3640A does not suport this kind of VIC. Can anybody give me a suggestion? Thanks in advance!

zhang-hao · 03-06-2004

I couldn't get any infomation about the Frame Relay subinterface down/up by issuing 'show log' on the 7206 router. So is that normal? Any advice is highly appreciated!

zhang-hao · 04-06-2006

Thanks a lot for your hint. Well, I cannot add the 7507mx into the inventory. The import status is not responding with this box.ping and telnet to this box is ok and no acl to snmp packet between nms and 7507. so it's due to the sysoid difference.I'...

zhang-hao · 04-07-2004

Hi Ansley,Thank you so much for your kind help!After checking some related documents, I found that the my question posted here is meaningless. The fact is that my customer has a NM-HD-2V on his 3640A router. But he inserted VIC-2BRI-S/T-TE in to the...

zhang-hao · 03-07-2004

Thanks a lot, that's helpful indeed!

zhang-hao · 02-11-2004

Thanks for your advice! Yes, your idea is good, but by using the method you mentioned, I still cannot get value of some hsrp instance! But later, i found the reason. It's due to the access-list configured on the vlan interface. You have permit the ...

zhang-hao · 10-29-2003

I think you can find USB to RS232 serial(DB-9) on the market. Then you can connect it to the RJ45 console cable provided by cisco. Well, I found a question and answer same as yours, please check:http://forum.cisco.com/eforum/servlet/NetProf?page=net...

Member Since	‎04-23-2002 07:38 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	60
Total Helpful Votes Received	10

User Statistics

User Activity

RME3.5 Cannot recognize 7507MX

Replaced Super engine not displayed in CiscoView 5.5

If we can get ATM or FR subinterfaces' crc or collision with any SNMP mib?

VIC-2BRI-S/T-TE compatible with 3640A?

Can the up/down info of FR subinterfaces be found in the syslog?

Re: RME3.5 Cannot recognize 7507MX

Re: VIC-2BRI-S/T-TE compatible with 3640A?

Re: Can the up/down info of FR subinterfaces be found in the sys

Re: how to get multi-hsrp standby state parameter with mib brows

Re: Console cable