I'm new to working with the UI Extensions and Macro Editor on a Room Kit Pro so I could use some guidance. I have a room with several microphones connected to a Biamp DSP. This device is accessible via SSH/telnet. I would like to build a page with...
Is it possible to install a stand-alone copy of ELM for the sole purpose of monitoring license usage in an 8.6 UC environment? Meaning, no 9.X anywhere (at least for a few months)?What would prevent this scenario from working properly?Thanks!
I'm having a problem where video conferences are timing out after 2 hours and 12 minutes consistently. I've located a number of solutions for adjusting the h323 timer on a PIX in order to solve this problem. My issue, is that I don't have a PIX, bu...
I have a LAN with a core router and two seperate internet-connected firewalls. Currently the core router has a default route pointing to the old firewall. I need to implement a policy-based route that allows traffic from several remote subnets to a...
Does anyone know if there is functionality to set up SNMP traps for packet loss on a priority queue in a LLQ QoS policy? In a scenario where you have many connecting routers, it would be nice to have alerts configured for a situation where not enoug...
Can you confirm that calls that traverse the Expressway to CMS in your scenario do NOT use RMS licenses? I see in the release notes this called out specifically for Expressway as Gatekeeper, but I wanted to confirm that is the case with CMS/CUCM.
I believe the customer wants a "single pane of glass" to view their DLU usage without having to navigate to multiple windows. If ELM will allow for that, I think that's all they want accomplished. When they upgrade to 9.X they understand it will op...
Ah, I was afraid I'd have to do a permit for the route and then next-hop every single one. Instead I just do a single round of denies in the ACL, then it will fail over to the static routes.Got it. Thanks!
Sorry OK here we go:Lets say we have a subnet 10.10.10.0/24 at a remote site. We also have 10.10.20.0/24 at another remote site. In between these routers is the core router at 10.10.0.1. We also have OldFirewall at 10.10.0.100 and NewFirewall at 1...
