Hi all,during a maintenance window some colleague powered off an ASA 5525X by keeping the power button pushed until it powered down. When we tried to power it back on it does not come back. Unplugged and re-plugged the power cable and still no luck. ...
Hi all,
i was wondering if anyone could point me to a document containing the required information/prerequisites to upgrade my current ASA 5525-X firewalls to the newer Firepower releases.
The firewalls are covered by smart net contract until Apri...
I have a router (Cisco 3845 with 1GB of memory and running IOS 12.4.24-T7 Advanced IP Services) on which i am trying to implement a bgp session with my ISP. My router has the three following interfacesint g0/0 -> 26.30.80.92 (ISP side)int g0/1 -> 94....
Hello all.I have the following situation. A colleagues installed a spam block (Norton something) and he put two ip's on itsinterfaces. 192.168.2.20 and 192.68.2.21. One will be used to receive and one to send mail but both on port 25. They use a sinl...
Hello,i have a problem with an xml directory ona cisco spa512g phone with 7.5.3 software version., I have downloaded the xml example from cisco site for directory service i have edited it and added (for testing) 3 numbers of my company. I have set th...
Hi all,just ti let you know the problem has been fixed.I read somewhere on Cisco that the new (5500-X series) ASA's have a "double" power on sequence where they first power on the bootrom module and then power on the main board to complete the power...
I tried everything. I talked to the ISP, i changed the mem modules, i changed a router (swapped for another 3845), as it seems good old CPU of 3845 is too small to handle modern BGP issues (or is faulty). Since the router is EoL i'll solve my issues...
I tried everything. I talked to the ISP, i changed the mem modules, i changed a router (swapped for another 3845), as it seems good old CPU of 3845 is too small to handle modern BGP issues (or is faulty). Since the router is EoL i'll solve my issues...
