On the Nexus 9k, the only MTU's are 1500 or 9216.  The 4500-X supports a range from 1500 to 9170.   OSPF especially is very sensitive to MTU mismatches. Does this mean that you cannot use jumbo frames between a Nexus and 4500-X switch, especially if ...

Can anyone advise on a good default policy-map for a Cisco AP on a 3750-X switchport?  I am particularly concerned about ensuring that CAPWAP traffic is not dropped on a pretty busy switch.  Also any other advice about the switchport configuration?  ...

Can anyone please advise if there are any differences in the ways which an ACE10 and ACE30 modules do load balancing - something which might affect http?  In other words, if I do an upgrade from an ACE10 to ACE30, are there any configuration changes ...

Good morning.Can someone please explain for a Vlan interface would be dropping packets on the input queue?  Please refer to the drops/flushes below.  This is from a 6500 with a Sup720, there are a number of vlans on it. This 6500 and it's HSRP partne...

Good day, I am running CW 3.2 with RME 4.3.0.When I am in the Network Topology view and I right click a device, choose TELNET, a web browser window opens up with the error: The webpage cannot be displayed.Isn't it that when I do that it should envoke...