About Peter Bishop

Peter Bishop · 05-19-2020

Our Customer is splitting between 2 different companies and we have moved the Attendant Console server, so it now has a new Domain Name and IP address. As a result, the Attendant Console Operator application is still trying to log on to the old serve...

Peter Bishop · 05-15-2014

Unified Communications Manager 9.1.2(1 Publisher - 7 Subscribers - 2 TFTP Servers) We have recently added some SIP softphone clients in our UCM and during our testing we found that in certain cases if you called a SIP softphone from an IPT phone - (S...

Peter Bishop · 11-17-2010

Hi,I have a IPT remote site connected via the WAN to a 2851 Router configured as the SRST gateway, so when the WAN link fails back to the main site where the main UCM Cluster resides, phones should be able to dial out via a local PSTN link.When we ca...

Peter Bishop · 02-02-2010

Hi Everyone,I have a strange problem here which I hope you can give me some guidance / help on.We have a Call Manager Cluster running 4.1.3 with Pub, 6 subs and 2 TFTP severs at the main site and 1 sub at the remote site. We have a number of gateways...

Peter Bishop · 09-19-2008

Hi,we are planning to upgrade our Customer's Call Manager from 4.1(3) to 6.1(2)and am fortunate enough to have a 'test' system.I have loaded and run the Data Migration Assistant 6.1(2) on the test system and it fail sValidation with 6 errors similar ...

Peter Bishop · 10-24-2016

I think the issue is that Cisco calculate that BST ends on 4th Sunday in October which was yesterday, but the power that be determined that BST ends next Sunday. We are running 9.1.2 and a 7942 is showing the correct time but others are not. If anyo...

Peter Bishop · 05-21-2014

Hi Brian, Thank you for all of your help on this. I have passed your findings onto the supplier of the softphone software and await their reply

Peter Bishop · 05-20-2014

Hi Brian, In the file – ‘287’ – I See the following which looks like the SIP client telling the calling party who to contact to complete the call before it drops:- 83725382.001 |15:00:47.320 |AppInfo |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP m...

Peter Bishop · 05-20-2014

Hi Brian,I have remade test calls and put the final called party into the same CM-Group as the SIP softphone client, which I hope makes the tracing easier. I also had to use a different SIP softphone client, so here are the call details for the attac...

Peter Bishop · 05-19-2014

Hi Brian,thanks for your offer of help. In the attached files there is the failed call – the details of which are shown below:-Calling Party – (IPT SCCP Extension) 808226 10.221.115.98Called Party – (Wave Soft...

Member Since	‎10-17-2007 02:32 AM
Date Last Visited	‎05-20-2020 12:35 AM
Posts	38
Total Helpful Votes Received	14

User Statistics

User Activity

Changing the name of the server the Attendant Console Operator points to

Strange CM-Group Behaviour

VG224 Analogue phones on a VG224 do not work using SRST

Mobile calls to E&M circuits fail - IP Phones work fine

Data Migration Assistant 6.1(2) Errors

I think the issue is that

Hi Brian, Thank you for all

Hi Brian, In the file – ‘287’

Hi Brian,I have remade test

Hi Brian,thanks for your