jlamanna1
Level 1
Level 1
Member since ‎08-14-2008
‎08-18-2017

User Statistics

  • 33 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
10 Replies
5 Replies

User Activity

Hi,I have a RV042 that is setup with a Dual WAN configuration.I've forced VOIP traffic out WAN1 and web traffic out WAN2 using protocol binding.The problem I'm having is that the VOIP traffic being forced out WAN1 has WAN2's IP address on the NATed p...
Hi,I'm trying to determine if the CPU usage on my VXR is adversely affecting network traffic.I'm pushing around 60-70Mbps of traffic through ethernet interfaces on it.Here's the output of sh proc cpu:#sh processes cpu sorted 5secCPU utilization for f...
Hi,I have 4 T1s going to a site, 2 of which are new (all 4 are with the same provider).I initially noticed that throughput of the 4xT1 bundle seemed a bit off, so I did additional testing.I found that whenever I have a certain T1 in the bundle (wheth...
Hi I have an old Cisco 3640 with 5 T1s in a MLPPP bundle.I've been reading around that with the BW of 5 T1s, I don't need to turn on Interleaving and Fragmentation.However, there is VoIP traffic going over this bundle as well, I do notice that occasi...
Hi,It appears with the 7.4.9c firmware, the phone no longer honors an Alert-Info header to specify a distinctive ring.As an example, sending Alert-Info: <n=Simple-1;w=2;c=1> does not play the Simple-1 ring tone, but will only play the default ring to...
Community Statistics
Member Since ‎08-14-2008 03:34 PM
Date Last Visited ‎08-18-2017 04:00 AM
Posts 33