Hi Raghuram,The below link would be helpful to start with.http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/software/configuration/guide/routconf.html#wp1224393Regards,DheerajSent from Cisco Technical Support iPad App
Hi,"sh ver" not showing the DRAM size as 4 GB is expected. However, you can continue using 4 GB DRAM as it is supported. "Cisco IOS Software supports a maximum of 2 GB of addressable memory. More than 2 GB of memory will be available for future cap...
Hi Patrick,Looks like the vwic3-2mft-t1 card is supported on the 1921 router.http://www.cisco.com/en/US/prod/collateral/routers/ps5855/data_sheet_c36-609138.htmlMinimum IOS required: 15.0(1)M3. You are running 15.1(4)M4 which is good.Try the card typ...
Hi,It clearly states that it requires more memory.You can check the below link for the memory requirements for your module.http://www.cisco.com/en/US/prod/collateral/modules/ps10598/data_sheet_c78-553913.html-Dheeraj
Hi,Can you check and verify if the PC requirements are met for CCP from the below link:http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/v2_6/rlsnts/ccp_rel_notes.html#wp44984Also, you can download the CCP full version from:ht...
