About durale1789

durale1789 · 07-31-2007

Hi,I want to use vrf lite with ipip tunnel but unfortunately it works one way but not the other.here...

durale1789 · 05-24-2007

i want to exactly the same thing but my problem is that i m establishing the vpn between 515e and 50...

durale1789 · 05-11-2007

yes i still want to nat 2.2.2.3 to 10.5.10.28the thing is about routing first.my default route is 1....

durale1789 · 05-11-2007

yes jon i meant without vpn. i can reach 2.2.2.2 which is the physical dmz pix interface. So that me...

durale1789 · 05-10-2007

i got your point ! thank u again for this explanation.Now an other question comes into my mind: if i...

durale1789 · 05-10-2007

thank you very much, it works fine now i just replaced static (inside,dmz) 2.2.2.3 10.5.10.28 netmas...

durale1789 · 05-10-2007

ok so sorry i meant static instead of nati need the traffic to be translated from 2.2.2.3 to 10.5.10...

durale1789 · 05-10-2007

ok so sorry i meant static instead of nati need the traffic to be translated from 2.2.2.3 to 10.5.10...

durale1789 · 05-10-2007

well,probably you didn t uderstand my issue !!it should be something like:Built inbound TCP connecti...

durale1789 · 05-10-2007

Hi,i d like to establish a vpn from a pix firewall 515 and pos version 7.0(5) with a public dmz and ...

durale1789 · 11-24-2006

ok so we can forget icmp. let's take ssh instead from the remote network, the acl access-list DEVPN ...

durale1789 · 11-24-2006

vpn acl is already included in the previous post namely DEVPN.here is the vpn config:crypto map VPNL...

durale1789 · 11-23-2006

i ve exactly the same problem but i can t apply your solution. I dont understand how you remove the ...

durale1789 · 11-23-2006

Hi,I ve configuration with my pix with a static nat rule which is working fine. However this rule do...

durale1789 · 11-22-2006

i resolved the problem. it was about the route between the pix and my network. And also i added glob...

vrf lite