About uhaskamp

uhaskamp · 01-19-2011

Hello together,we try to log hits to ACL entries to a syslog server.We have an access list which blocks HSRP packets. We seen them in 'show logg ip access-list cache'show logging ip access-list cacheSource IP Destination IP S-Port D-Port ...

uhaskamp · 03-14-2006

Hi all,I'm looking for informations about MDI/MDI-X on the Ethernetmodules for the Cat6500 with Sup720 and IOS.For the Cat6500 with CatOS I can find this information in the release notes of the software.But there is nothing for IOS at least nothing I...

uhaskamp · 11-20-2002

Hi all,I have tried to configure CBWFQ and PPP Multilink on an ISDN BRI interfacewith DDR. The dialer load-threshold is set to 1 so that both b-channels of the BRI interface are connected when the link comes up.I need a traffic class with a minmum of...

uhaskamp · 02-14-2011

Hi,this is not complettly right in my eyes.With Nexus1010 version 4.0(4) you are not able to change to role or domain ID without a reinstall of the software. And there for you need the .iso image which is not available on CCO for anyone.So you need t...

uhaskamp · 01-30-2011

Hi Robert,thanks for your answer.So, it is little strange.We had configured ACL logging again from scratch and use an other syslog server and now it seems to be working.We see all entries in the syslog that we see in the acl log cache.I don't really ...

uhaskamp · 01-18-2011

Hi Robert,thanks for the great discription.Is there a difference between "normal" data plane traffic and traffic for the control plane for the logging point of view?We have an access list which blocks HSRP packets. We seen them in 'show logg ip acces...

uhaskamp · 10-12-2009

Hi Subash,in my eyes you can not do this with only the loopback.You can try the following:interface Gigabit 0/2 bridge-group 1!interface gigabit 0/1 bridge-group 1!interface BVI 1 ip address 10.10.10.1 255.255.255.0!bridge irbbridge 1 protocol ieee b...

uhaskamp · 10-09-2009

Hi Subash,for me it is not clear what you want to achieve with this config.In my eyes you could configure the two LAN interfaces with bridging and the Layer 3 interface would then be a BVI (bridged virtual interface).Then you have a direct Layer 2 co...

Member Since	‎02-27-2001 12:51 AM
Date Last Visited	‎10-09-2017 12:05 PM
Posts	19

User Statistics

User Activity

N7k: ACL log

MDI/MDI-X on Ethernetmodules in Cat6500, Sup720, IOS

CBWFQ and PPP Multilink

Re: Nexus1010 Migration Question ?

Re: N7k: ACL log

Re: Nexus 7000 ACL logging (OAL)

Re: Need help on Loopback Ip Address

Re: Need help on Loopback Ip Address