Does anyone know how to match on an empty standard BGP community list? I'd like to filter out all routes that have at least one community configured and only advertise those without communities. I know how to do this with expanded communities, e.g. i...
Hi! I am testing a couple of wireless sensors (1800S) with Cisco DNAC and noticed that IP SLA tests always fail no matter what. There's not much configuration for IP SLA tests apart from what looks like a wireless QoS category (Platinum, Gold, Silver...
Hi I believe we're observing a bug behavior with one of our applications that uses Cisco ISE REST API.Can anyone from Cisco confirm the following? We try to query API to get a list of Endpoints using the following filter:filter=groupId.EQ.<id>&filter...
Hi all I am trying to fine tune egress buffers on one of our C9500-48Y4C switches (High Performance). I've read few documents and watched couple Cisco Live presentations and still can't fully grasp how egress buffers memory is being allocated. My und...
Hi I am aware that BFD Echo does not work through transparent firewall because of identical source/destination IP/MAC addresses. However, would you be so kind to confirm if Plain BFD is supported (i.e. non Echo mode) If so, has anyone implemented it?...
I don't think this is a complete answer @Greg Gibbs . This post discusses Bulk operations.Bulk operation return Bulk Operation Status ID in its response (as you've said it is in Location header).Once returned, one has to use this ID to request Bulk O...
It's 2021 and there are still silence with regards to 9800-CL support for Azure. We don't run services in AWS, or GCP, we're Azure customer... does feel we'll be looking for a different vendor on the next refresh cycle
That's perfect @Dan FreyThank you To advertise directly attached subnets inc summaries I did this ip community-list standard EMPTY permit
route-map into-MPLS permit 10
description Local BGP Networks
match community EMPTY exact-match
match route-ty...
Cool. Thanks. At least I know I was doing it right :)Not sure when we're going to upgrade though, would be nice if it's filed and maybe fixed in the next patch?Let me know
I am not 100%, but I think I may have found the answer :) Note: The network infrastructure must be running software release 8.8.111 or later to perform these tests. For IP SLA, the sensor connected to the AP which has the IP SLA responder feature. I...
