craig.corbett

It would be nearly impossible to know what has happened to break the CCA if you have done all the co...

  Thanks John for that command very useful.

Not sure if this applies here, but some devices draw more power than others and there may be a limit...

That looks like a java error.You may get issues if making changes via the CLI that the CCA does not ...

Is this call internally e.g. over a VPN or externally?If externally check the applicable codec setti...

Was this a CCA implemented solution or CLI or both? If CCA what version?I hope it wasn’t CCA based a...

Hi,You can set the cnf file location and configuration mode this way. E.g. per phone type and not pe...

Ours was setup uk English as well The phone constantly reloading. As soon as I changed to US local, ...

Brian,I had an issue with the conference phone a few weeks ago, turned out they don’t like UC500’s s...

Not sure if this will help, but when a call is made to production on 211, the loud ring will also ac...

In case this is useful to others, recently I have used an algo loud ringer for this purpose with a a...

Hi, it is possible.http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_administration_gui...

Hi, give spa525g-7-4-8 a go.Craig.

I had a issue similar to this a while ago and it did turn out to be the firmware on the phones. Post...