Netflow is not supported on sup6E. It is supported on 7-E and 7L-E. with the help of netflow daughter cards we can enable netflow on supIV and supV, however daughter card is not applicable to sup6E.Regards,Somu Jayaraman
Version 5 netflow uses a default fixed record-fields.Remove the flow monitors from all the interfaces
(config)# flow monitor test
(config-flow-monitor)# no record test
(config-flow-monitor)# default record
(config)# no flow record test
Put back th...
Good one Aninda!, Just to add few more things, we can have point to multipoint configurations as well, using the frame-relay ip statements.Some useful show commands,show frame-relay route,show frame-relay pvc <>show frame-relay lmi And LMI packets wo...
Hi,I believe there should be a configuration like "vtp interface vlan only" in the running config.changing this to "vtp interface only" will fix the issue.Let me know if you have any further questionsCheers,SomuRate helpful posts.
Hi,There is a bug filed for this and developers are actively working on this.- http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtj03875Cheers,SomuRate helpful posts