About cjoseph23

cjoseph23 · 11-11-2008

Thanks for the Replies. I figured this was some erroneous info on the part of WCS. When i look in th...

cjoseph23 · 11-11-2008

I searched for my mac address in WCS and I recieved three results. See the attached screenshot. I am...

cjoseph23 · 09-17-2008

I was having the same issue with a new 7937 phone we were trying to install. When I had the switchpo...

cjoseph23 · 09-16-2008

For anyone looking to limit access to a SSID using ACS here is the doc I used to accomplish this.Res...

cjoseph23 · 09-12-2008

Thanks, I figured I would need to create another SSID and allow only my management users access to t...

cjoseph23 · 09-12-2008

I have a WiSM blade and about 25 LWAPP - all 1131s running 4.2.130. I do have 2 1252 APs and I want ...

cjoseph23 · 05-07-2008

I am running the latest 4.2 maintenance release on my WiSM - 4.2.112. I am running WCS 4.2.62.0 I lo...

cjoseph23 · 04-30-2008

I recieved the follwoing message from WCS but not sure what it means.IDS 'Auth flood' Signature atta...

cjoseph23 · 04-28-2008

Rick,The no auto-summary command did the trick. I appreciate your help on this one.Thanks,Cyril

cjoseph23 · 04-24-2008

Rick,10.1.0.3 is my firewall. What is happening is traffic sourced with 75.32.90.128 die at the rout...

cjoseph23 · 04-24-2008

Rick thanks for the quick response. The 10.1.0.0 network is actually a Gig interface on this same ro...

cjoseph23 · 04-24-2008

I am trying to replacing the following static route:ip route 75.32.90.128 255.255.255.128 10.1.0.3He...

cjoseph23 · 04-10-2008

I've also been trying to use ACS to authenticate users to manage my WCS. I have not been able to mak...

Date Registered	‎04-09-2008 02:53 PM
Date Last Visited	‎08-18-2017 04:00 AM
Total Messages Posted	108
Total Helpful Votes Received	29

Re: Wireless Client associated to 2 APs